Fingerjointed D4S

Clelands Timber Products has an extensive range of D4S product both in size and grade.

Dressed 4 sides

Options Available

Profile 25mm 38mm 50mm Treatment Finish
Fingerjointed D4S 50 40 x 18 40 x 32 42 x 42 LOSP H3.1 Pre Primed
Fingerjointed D4S 75 65 x 18 65 x 32 65 x 42 LOSP H3.1 Pre Primed
Fingerjointed D4S 100 90 x 18 90 x 32 90 x 42 LOSP H3.1 Pre Primed
Fingerjointed D4S 125 115 x 18 115 x 32 115 x 42 LOSP H3.1 Pre Primed
Fingerjointed D4S 150 135 x 18 135 x 32 135 x 42 LOSP H3.1 Pre Primed
Fingerjointed D4S 200 180 x 18 180 x 32 180 x 42 LOSP H3.1 Pre Primed

Finish Options

Pre primed option

Our primer is a machine coated alkyd oil based primer designed as an adhesion coat for the next coat of paint. This primer does not waterproof the timber but does slow water uptake.

Radiata Pine contains tannin which can cause paint to turn brown. Our primer blocks the migration of the tannin into the paint coating minimising the discolouration of the painted surface.

Treatment Types

LOSP H3.1

LOSP H3.1 is an effective preservative designed to provide lasting protection for wood products used in external situations above ground protecting against decay and insects. The timber is treated in finished form which improves its dimensional stability.

This LOSP product comes with a 25 year guarantee against fungal decay and insect attack and is water repellent to reduce general uptake of moisture.

For more detailed information about this process refer to http://www.kopperspc.co.nz/products/protim-optiumum-losp.html

Grades Available

Finger Jointed

Finger jointing results in much higher quality and stronger pieces and components, while dramatically reducing waste. The two most important advantages of finger jointed lumber are straightness and dimensional stability.

Components

Appearance Grade D4S

Appearance Grade D4S
Grooved Batten

Grooved Batten